A Mining Method Selection Model Using a Numerical Approach by UBC for Laila Underground Coal Mine

Authors

  • NEZAMUDDIN FAQIRZADA Author
  • MOHAMMAD MUSLIM FAQIRYAR Author

DOI:

https://doi.org/10.68924/wmjc5q34

Keywords:

Laila Coal Mine, Rock Mass Rating (RMR), Rock Substance Strength (RSS), Underground Mining System, University of British Columbia (UBC) Technique

Abstract

This research concentrates on selecting the most appropriate underground mining system for the Laila coal deposit, which is situated in the Darah-i-Souf region of Samangan state. The selection system is based on a holistic evaluation of geotechnical, geometrical, and geological parameters, applying the UBC (University of British Columbia) technique, improved by Nicholas. This numerical technique integrates critical parameters, including the geometrical shape of the ore deposit, Rock Substance Strength (RSS), and Rock Mass Rating (RMR). Data were obtained using laboratory analysis, comparisons with similar mining cases, and geological reports. The seam thickness, mine's depth, rock strength, and inclination angle were input into the UBC technique, which analyzed ten diverse mining systems. As part of these, Sublevel Stoping and the Cut and Fill systems obtained the highest scores. After a precise comparison, the Cut and Fill system was evaluated as the optimal technique due to its suitability for the mine’s geological status and its higher safety level and effectiveness. This study gives a fundamental model for future specialized mining performances and planning, sharing the optimal underground mining, saving, and stable mining for the Laila coal mine.

Downloads

Published

2026-08-22

Issue

Section

Articles

How to Cite

A Mining Method Selection Model Using a Numerical Approach by UBC for Laila Underground Coal Mine. (2026). Kabul Polytechnic University International Journal of Engineering & Technology, 6(1), 1-12. https://doi.org/10.68924/wmjc5q34

Similar Articles

91-100 of 104

You may also start an advanced similarity search for this article.