Comparative Analysis of the Chemical Compositions of Afghani Ghori and Various Pakistani Cement Brands Used in Afghanistan
DOI:
https://doi.org/10.68924/1k1fky31Keywords:
Bogue's Formulation, Chemical Compounds, Chemical Constituents, Ordinary Portland CementAbstract
Cement is widely used in construction works. In Afghanistan, despite Ghori Portland cement, several other Pakistani imported cement brands are used to a vast extent. Therefore, it is required that the cement properties shall meet the standard properties established by the codes. In this study, the Ghori-1 and imported cement brands are compared in terms of chemical constituents and compounds. The chemical composition of Ghori cement was analyzed by conducting XRF/XRD tests and the chemical composition of imported cement was collected from the published research articles. The C3S, C2S, C3A, and C4AF compound composition was calculated through the chemical analysis of cement using Bogue's equation. It was found that in Ghori cement, the Al2O3 and SO3 contents exceed the specified limits. The higher amount of SO3 leads to the expansion of sulfates in cement. Moreover, based on the comparison of four main compounds (C3S, C2S, C3A, and C4AF), it was found that the Ghori-1 cement exhibit a lower amount of C3S and a higher amount of C2S which produces the least strength compared to the other cement brands. Some deviations were found in the chemical composition of Ghori cement and do not meet the standard values established by the codes which are due to low-quality control during the cement production process. Based on the comparison of different brands considering the chemical compositions, the Cherat and Bestway cements met the recommended values given by the standards. The Ghori cement needs further quality control during the production process to ensure the codes specified quality.