Investigation of Adsorption Performance In The Removal of Waste Water Contaminants By Nanostructures From Electro-Oxidation of Different Metals
DOI:
https://doi.org/10.68924/3ek95j62Keywords:
Adsorption, Contaminated Water, Heavy Metals, Removal Efficiency, VoltageAbstract
Water pollution with various pollutants, including heavy metals, is a serious environmental challenge for the world. Most of the methods available for removing contaminants from contaminated water generally show their effectiveness at high concentrations and are not responsive to low concentrations (concentrations below 100 mg / l). They are also not affordable. Therefore, it is necessary to use a method that in addition to being low cost, its performance is also effective in refining heavy metals. Adsorption is a very rich process with scientific and experimental background due to its many advantages. This study is a review of the study and collection of information regarding the adsorption of metal contaminants from contaminated water by nanoparticles produced by electro-crystallization. Then, at the end, the effect of increasing the oxidation voltage and consequently the effect of reducing the size of nanoparticles resulting from electro-oxidation of various metals in the removal efficiency of contaminants has been investigated. According to the results of studies in this field, increasing the voltage has reduced the size of nanoparticles produced, which has resulted in an increase in the efficiency of adsorption of heavy metals from contaminated water, which in some cases even the absorption rate has reached over 90%.