Research On Selecting The Most Suitable Extraction Method For Achin Talc-Magnesite Mine In Nangarhar Province, Afghanistan

Authors

  • NAQIBULLAH TURABI Author
  • MOHAMMAD ISMAEIL SIDDIQI Author
  • NOORULLAH SHAMS Author
  • HAMIDULLAH TURABI Author

DOI:

https://doi.org/10.68924/6wr5wa17

Keywords:

Average Stripping Ratios, Magnesite, Open-Pit Mining, Pit, Total Cost

Abstract

Magnesite is a natural material that has various uses in today's industry, but in the Achin Talc-magnesite mine, only Talc has been mined by underground mining method. And the magnesite has remained intact. However, the magnesite veins are located near the Talc veins, and their thickness is 20-70 meters, which is considered to be completely suitable to be extracted by open-pit mining method.

Global practice data shows that currently 83% of the world's mines are extracted by the open-pit mining method. And about 17% of mines are extracted by underground mining methods.Independently extraction of Talc by underground mining method raises the total mining cost, and it also makes the extraction of the magnesite deposit impossible or difficult in the future.

To select appropriate method for the simultaneous extraction of Talc and magnesite, the average stripping ratio was obtained by the computational method. The average stripping ratio achieved is (K=2.39). Comparing it with global norms, and considering the position of mineral veins, open-pit mining method is proposed for this mine. This makes it possible to extract both Talc and Magnesite with a very lower cost.

Independently extraction of Talc by underground mining method has created underground voids next to the magnesite vein. Which will cause the magnesite vein to slide into these voids in the future and now It causes the price of extraction per ton of Talc to rise.

Author Biographies

  • NAQIBULLAH TURABI

    Naqibullah turabi received his BSc degree in Mining Engineering department from Kabul polytechnic University in 2005, and completed MSc in geology engineering and exploration 0f mines in 2019, he is working as assistant professor in the underground mining engineering department, Kabul polytechnic university , Kabul Afghanistan, His area of research include  ore mining technology , drilling and blasting, mining economy.

  • MOHAMMAD ISMAEIL SIDDIQI

    Mohammad ismaeil siddiqi received the MSc degree in mining engineering department from Kabul polytechnic university in 1986, from 2002 to 2010, he served as the dean of the faculty of geology and mines, he has been teaching the underground mining engineering department for 37 years as a professor, His area of research include underground mining engineering, environmental engineering and occupational safety and health.  

  • NOORULLAH SHAMS

    Noorullah Shams was born in 1987 in Kabul city. He received his BSc degree in Mining engineering from Kabul Polytechnic University in 2010. Noorullah Shams completed his M. Tech in Mining engineering, from Indian Institute of Technology, Indian School of Mines (IIT-ISM), Dhanbad, India in 2018. Since 2012 tell now he works as an assistant Professor in the department of Underground Mining Engineering, Kabul Polytechnic University. His research areas are includes Underground Coal mining technology, underground mine constructions and Rock mechanics.

  • HAMIDULLAH TURABI

    Hamidullah Turabi received a MSc. degree from Kabul Polytechnic University from Water and Environmental Engineering Faculty, Ph.D. researcher at Hohai University. Presently he is working as assistant professor at Hydraulics structure engineering department

Downloads

Published

2026-08-22

Issue

Section

Articles

How to Cite

Research On Selecting The Most Suitable Extraction Method For Achin Talc-Magnesite Mine In Nangarhar Province, Afghanistan. (2026). Kabul Polytechnic University International Journal of Engineering & Technology, 2(1), 189-202. https://doi.org/10.68924/6wr5wa17

Similar Articles

1-10 of 39

You may also start an advanced similarity search for this article.