Seismic Performance of Tall Buildings with and Without Outrigger and Belt Truss Systems

Authors

  • EZATULLAH YAQUBI Author
  • AHMAD JAWID RAHIMI Author
  • NASIBA FAKOR Author
  • PARWANA YAQUBI Author

DOI:

https://doi.org/10.68924/w1kn4j53

Keywords:

Outrigger and Belt Trusses, Response Spectrum, Story Displacement, Story Drift, Story Stiffness

Abstract

The construction of tall buildings today is increasing all over the world to meet the needs and challenges of the construction industry. The intention to build tall buildings is due to population growth and insufficient horizontal space. The increase in height of tall buildings requires special attention to the lateral stiffness of the structure, where the introduction of outrigger sections and belt trusses plays an essential role. In this paper, an investigation has been performed to study the behavior of outrigger and belt trusses in different locations of the building using response spectrum analysis. For this analysis, a three-dimensional building model is developed for G + 16, G + 20, and G + 24 RC buildings with and without outrigger and belt truss systems to find out the performance of outrigger and belt trusses subjected to earthquake loading conditions. The analysis is done by dynamic analysis (Response spectrum method) in the zone (IV) as per IS code, using ETABS software, and the analysis results were compared among lateral displacements, story drift, and story stiffness to find out the optimal position of outriggers and an efficient reduction of story displacement and story drift in a tall building. It was observed that the introduction of outrigger and belt trusses at the middle stories reduces considerable story displacement and drift and enhances the stiffness of the structure. By providing outriggers and belt truss systems in middle stories, story displacement is reduced up to 60%, story drift is reduced by up to 50%, and story stiffness is increased by up to 10%.

Author Biographies

  • EZATULLAH YAQUBI

    Ezatullah Yaqubi received a B. Eng. degree in Civil and Industrial Engineering from Kabul Polytechnic University, Kabul Afghanistan in 2014 and M. Tech in Structural engineering from Osmania University, Hyderabad, Telangana, India in 2022. Currently, he is working as a lecturer in the Department of Civil and industrial engineering of the Construction Faculty of Jawzjan University. His area of research includes Structural Analysis, Structural Dynamics, Concrete structures, and Earthquake Engineering.

  • AHMAD JAWID RAHIMI

    Ahmad Jawid Rahimi received a B. Eng. degree in Civil and industrial engineering from Jawzjan University, Jawzjan Afghanistan in 2014 and M. Tech in Structural Engineering from Amity University, Noida, Delhi NCR, and India in 2019. Currently, he is working as a lecturer in the Department of Civil and industrial engineering of the Construction Faculty of Jawzjan University. His area of research includes Structural Analysis, Concrete and steel structures, Construction management, and Earthquake Engineering.

  • NASIBA FAKOR

    Nasiba Fakor received a B. Eng. degree in Civil and industrial engineering from Jawzjan University, Jawzjan Afghanistan in 2014 and M. Tech in Civil and Industrial Engineering from KPU, Kabul Afghanistan in 2020. Currently, she is working as a lecturer in the Department of Civil and industrial engineering of the Construction Faculty of Jawzjan University. Her area of research includes Construction Technology, Construction Management, and Earthquake Engineering.

  • PARWANA YAQUBI

    Parwana Yaqubi received a B. Eng. degree in Civil and industrial engineering from Jawzjan University, Jawzjan Afghanistan in 2015. Currently, she is working as a lecturer in the Department of Construction Engineering of Jawzjan Technical Institute. Her area of research includes Structural Analysis, Construction Technology, Construction Management, and Earthquake Engineering.

Downloads

Published

2026-08-22

Issue

Section

Articles

How to Cite

Seismic Performance of Tall Buildings with and Without Outrigger and Belt Truss Systems. (2026). Kabul Polytechnic University International Journal of Engineering & Technology, 2(2), 47-60. https://doi.org/10.68924/w1kn4j53

Similar Articles

You may also start an advanced similarity search for this article.