Optimal Capacitor Placement in the East part of Kabul Distribution System using Black Widow Optimization (BWO) Algorithm
DOI:
https://doi.org/10.68924/4de9zh39Keywords:
Active Power Losses, Black Widow Optimization Algorithm, Capacitor Placement and Voltage Profile ImprovementAbstract
In this paper, for determining the optimal size and allocation of capacitors for the East part of Kabul distribution system (EKDS) a new metaheuristic algorithm is used. The objective of this work is to reduce the power loss, minimize the installation cost of capacitors and improve the nodes’ voltage profile. The study is performed in three steps. First, the mathematical model of distribution network is made and power flow and losses of the network are obtained by Newton – Raphson load flow analysis method in MATLAB – R2017a environment. Then, the Black Widow Optimization (BWO) algorithm is used to obtain the optimal capacity of capacitor banks and the appropriate locations for the capacitors are determined with the help of real power loss sensitivity coefficient. At the end, the east distribution network of KDS that contains 9 main feeders and 183 buses is analyzed for different operating points (50%, 75%, 100% loads and changing of 6.25 % load over 50% light load) and obtained results are compared with the present network (without capacitor banks). The result shows that the optimized system can reduce the annual losses and also can enhance the stability of the system.