Use of Worn Tires as Aggregates Replacement and its Effect on Certain Properties of Concrete

Authors

  • AHMAD MASOUD AHMADYAR Author
  • SIFATULLAH BAHIJ Author
  • SEBGHATULLAH KARIMI Author

DOI:

https://doi.org/10.68924/zpzmfy90

Keywords:

Mechanical Properties, Physical Properties, Rubber Concrete, Ultrasonic Pulse Velocity, Worn Tires

Abstract

This article aims to investigate the replacement of natural aggregates with worn tires and its effect on certain properties of concrete. Therefore, worn tire aggregates were used as fillers in the concrete mixtures at 5%, 10%, and 15%. The prepared samples were examined for physical properties such as dry density, porosity, and water absorption, ultrasonic pulse velocity (UPV) after 28 days of curing as well as mechanical parameters such as compressive, split tensile, and flexural strengths after 7 and 28 days of curing. The results show that the physical properties of concrete have improved with the incorporation of rubber, and this improvement was more significant for higher percentages of worn tires. In contrast, the mechanical properties have decreased with the increase of rubber content in concrete mixtures, yet rubber concrete exhibited ductile characteristics as opposed to the brittle behaviors of conventional ones. Finally, it was found that the concrete containing rubber has lower sound transmission properties compared to the reference ones.

Author Biographies

  • AHMAD MASOUD AHMADYAR

    AHMAD MASOUD AHMADYAR received his bachelor’s degree in civil engineering from Kabul Polytechnic University in 2012, and he obtained his master’s degree in structural engineering from the same university in 2022. From 2013 to 2021, he worked on NATO and governmental projects. He is currently engaged in research and plans to pursue his studies at the Ph.D. level. His area of research interest includes concrete and construction materials.

  • SIFATULLAH BAHIJ

    SIFATULLAH BAHIJ received his B.Sc. degree in Civil Engineering from Kabul Polytechnic University in 2012, M.Sc. degree in Civil Engineering from King Fahd University of Petroleum & Minerals, Saudi Arabia, and he is currently a Ph.D. candidate in the Civil Engineering department of National Institute of Applied Sciences, Strasbourg, France. He is a faculty member of the Civil and Industrial Construction Department of Kabul Polytechnic University, Kabul, Afghanistan. His research interests include concrete and construction materials, ultra-high performance fiber reinforced concrete (UHFRPC), green concrete and newly generated concretes, cementitious materials with plastic and rubber wastes, finite element modeling (FEM), destructive, non-destructive, SEM, interferometry, and microscopic analysis, and retrofitting of concrete elements with various cementitious and FRP materials.

  • SEBGHATULLAH KARIMI

    SEBGHATULLAH KARIMI received his B.Sc. degree in Civil Engineering from Kabul Polytechnic University in 2007, and his M.Sc. degree in Construction Management from the University of Brighton, UK in 2012. He was a faculty member of the Civil and Industrial Construction Department of Kabul Polytechnic University, Kabul, Afghanistan from 2008 to 2021. His research interests include concrete and construction materials and construction project management. 

Downloads

Published

2026-08-22

Issue

Section

Articles

How to Cite

Use of Worn Tires as Aggregates Replacement and its Effect on Certain Properties of Concrete. (2026). Kabul Polytechnic University International Journal of Engineering & Technology, 2(2), 129-144. https://doi.org/10.68924/zpzmfy90

Similar Articles

11-20 of 48

You may also start an advanced similarity search for this article.