Comparing the Elongation and Tensile capacity of Khan steel Reinforcement bar with the Esfahan and Tashkent companies

Authors

  • AHMAD ZAKER MUDASER Author
  • MATIULLAH WAHEDI Author

DOI:

https://doi.org/10.68924/2v87kd66

Keywords:

Elongation, Reinforcement Bar, Tensile Capacity, Ultimate Stress, Yield Stress

Abstract

The present work studies  and compares the tensile capacity of reinforcement bar, yield stress, ultimate stress, and elongation of reinforcement bar from different manufacturing companies (Khan Steel, Esfahan and Tashkent). The aims of this investigating is the yield and ultimate stress, tensile capacity, and elongation of steel bars under tensile stress used according to the standard in the members of reinforced concrete buildings. The laboratory test of yield, ultimate stress, and elongation on of reinforcement bar has been performed according to the (ASTM, A615) standard, the obtained result has been compered and the shows the tensile strength does not have a direct effect on the elongation, but in the other hand, tensile capacity, tensile strength and elongation of reinforcement bar considering the (ASTM, A615) standard is acceptable.

Author Biographies

  • AHMAD ZAKER MUDASER

    AHMAD ZAKER MUDASER received his B.Sc. degree in Civil Engineering from Al-Beroni University in 2014, and he obtained his M.tech.  Degree in Structural Design from the Maharshi Dayanand University Rohtak, India, in 2018. He is a faculty member of the Civil Engineering Department of Al-Beroni University, Kapisa, Afghanistan. His area of research is Structural Engineering.

  • MATIULLAH WAHEDI

    MATIULLAH WAHEDI received his B.Sc. degree in Civil Engineering from Al-Beroni University in 2012, and he obtained his master’s degree in Structural Design from the Kabul Polytechnic University, in 2021. He is a faculty member of Theoretical and Applied Mechanics Department of Kabul Polytechnic University. His area of research is Earth quake Engineering.

Downloads

Published

2026-08-22

Issue

Section

Articles

How to Cite

Comparing the Elongation and Tensile capacity of Khan steel Reinforcement bar with the Esfahan and Tashkent companies . (2026). Kabul Polytechnic University International Journal of Engineering & Technology, 3(1), 91-104. https://doi.org/10.68924/2v87kd66