Characterization of recycled concrete aggregates and their effects on fresh and hardened properties of normal concrete strength
DOI:
https://doi.org/10.68924/bqxj5n88Keywords:
Natural Concrete Aggregate (NCA), Recycled Aggregate (RA), Recycled Concrete Aggregate (RCA)Abstract
In today's modern world, the significance of maintaining a clean environment and the conservation of natural resources are super important globally. This goal emphasizes the need to reduce waste generation, promote recycling and sustainable waste management practices, and minimize the environmental impact of consumption and production activities.
Concrete demolished waste presents both environmental and economic challenges. Improper disposal of concrete waste can lead to land degradation, contamination of soil and water bodies, and contribute to greenhouse gas emissions. By minimizing the need for new materials, the carbon emissions associated with their extraction and transportation are reduced. Moreover, the accumulation of concrete waste in landfills occupies valuable space that could be used for other purposes.
This paper studies the effects of replacement of natural aggregates with recycled aggregates on fresh and hardened properties of normal strength concretes. The study focuses on determining the appropriate percentage of recycled aggregate to achieve desired concrete workability and strength. The percentage of recycled aggregate that partially and fully replaced natural aggregate by weight was (0%, 50%, 75%, and 100%). Concrete cubes, cylinders and beam were casted and tested in Kabul Polytechnic University’s laboratory and the comparison between recycled coarse and fine aggregate with natural aggregate has been made in terms of various fresh and hardened properties, including absorption, air content, slump/workability, specific gravity, compression strength, tensile strength, and flexural strength. Based on the empirical findings obtained in this study, it can be inferred that the incorporation of recycled concrete aggregates (RCAs) at varying replacement percentages (0%, 50%, 75%, and 100%) yields corresponding compressive strength values of 30.54 MPa, 24.37 MPa, 19.37 MPa, and 18.27 MPa, respectively. These results demonstrate the feasibility of utilizing RCAs in practical construction ventures, highlighting their favorable performance characteristics and overall viability as a sustainable alternative within the industry.